Characterization and conductive coating of phosphors for improved brightness

In this study, the phosphors used in CRTs are coated with In2O3 conductive layer derived from the hydrolysis of indium chloride. The conductive coating retards/eliminates charging-up on the phosphor surface during the bombardment of the electrons and improves the cathodoluminescent brightness of the phosphor. However, the non-emissive conductive coating also degrades the cathodoluminescent brightness when it is too thick. The cathodoluminescent brightness increases initially with the amount of coating, reaches a maximum at 10 wt.% InCl3, and decreases with further increase of coating. It is found that with a 10 wt.% InCl3 coating, the brightness of phosphor increases by 20% at 500 V and 1 mA.