Title of article :
XPS analysis of down stream plasma treated wool: Influence
of the nature of the gas on the surface modification of wool
Author/Authors :
R. Molina، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2005
Abstract :
A microwave plasma treatment in a down stream configuration was used to modify the natural hydrophobocity of untreated
wool fibers. This property is a consequence of the presence of a Fatty acid monolayer (F-layer) on the outermost part of the fiber
surface. The wool fibers treated with plasma were analyzed by means of X-ray photoelectron spectroscopy (XPS) without
previous exposure to the air. Experiments have been carried out with air, water vapor, oxygen and nitrogen as plasma gas. The
‘‘in situ’’ analysis of the treated samples has permitted to differentiate between the plasma effects and those other linked to the
exposure of the fibers to the air after their treatment. The results have evidenced the effects induced by the different active species
generated by plasma from the different components of the air. In general, the intensity of C–C peaks decreases and that of the C–
O, C O and O–C O increases when using a gas containing oxygen species. Simultaneously, the intensity of the S–S groups
decreases and that of the sulphonate (SO3 ) increases. Other changes are also detected in the intensity of the N 1s level. The
extent and characteristics of the oxidation and functionalisation of the hydrocarbon chains of the F-layer depend on the nature of
gas. Thus, whereas treatments with plasmas of air and water vapor strongly affect the hydrocarbon chains of the F-layer, oxygen
is less effective in the oxidation process. It has been also noted that the active species formed in the nitrogen plasma do not induce
any significant change in the surface composition of the wool fibers.
Keywords :
Down stream plasma , Remote plasma , wool , Fatty acid monolayer , Surface functionalisation , Surfaceetching , polymer , PLASMA , XPS
Journal title :
Applied Surface Science
Journal title :
Applied Surface Science