A low temperature surface preparation method for STM nano-lithography on Si(1 0 0)

Registration markers are crucial in connecting scanning tunneling microscope (STM) lithographed nano- and atomic-scale devices to the outside world. In this paper we revisit an ultra high vacuum annealing method with a low thermal budget that is fully compatible with etched registration markers and results in clean 2 × 1 reconstructed Si(1 0 0) surfaces required for STM lithography. Surface contamination is prevented by chemically stripping and reforming a protective silicon oxide layer before transferring the sample to the vacuum system. This allows for annealing temperatures of only 900 °C, where normally carbon contaminants result in the formation of SiC clusters on the surface at annealing temperatures below 950 °C. Reactive ion etched marker structures with an etch depth of 60 nm and a typical lateral dimension of only 150 nm survive a 900 °C flash anneal.