Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers

The effect of thermo-hygro-mechanical (THM) densification temperature on the surface color, roughness, wettability, and chemical composition of trembling aspen (Populus tremuloides) and hybrid poplar (Populus maximowiczii × P. balsamifera) veneers was investigated. Veneers were subjected to four THM densification temperatures (160 °C, 180 °C, 200 °C, and 220 °C). Veneer color darkened with increasing THM densification temperature. Surface roughness decreased between 160 °C and 200 °C. Wettability decreased after THM densification, but no significant difference was found between treated specimens. ATR-FTIR and XPS results confirmed that THM densification caused major chemical changes in veneer surfaces, and more pronounced at temperatures higher than 160 °C.