Synthesis and characterization of porous media produced by a sol-gel method

Mesoporous silica materials were synthesized by sol-gel method using tetraethoxysilane (TEOS) as precursors and surfactants i.e., cetyltrimethyl ammonium bromide (CTAB), sodium dodecyl sulfate (SDS), and polyoxyethylene cetyl ether (Brij 56) as templates. Surfactant templates were completely removed by calcination to form mesoporous structure. The effects of type and amount of surfactants on the characteristics of samples were studied. The textural characteristics such as surface area, pore volume, pore size, and pore size distribution were determined by nitrogen sorption isotherms. Fourier transform infrared (FTIR) spectroscopy was employed to qualitatively identify the chemical functionality and to confirm the removal of surfactant template. Scanning electron microscope (SEM) and transmission electron microscope (TEM) were used to directly observe surface morphology and mesoporous structure, respectively. The adsorption capacity of the synthesized adsorbent for toluene vapor was examined. We found that the pore volume and pore size of mesoporous materials affected the adsorption capacity. The sample prepared with high content of CTAB under basic condition (pH ~ 7) yielded large pore volumes and pore sizes and subsequently possessed the high adsorption capacity for toluene vapor.