Effect of Gas Density on the Hydrodynamics of Bubble Columns and Three-Phase Fluidized Beds

Experiments were performed at ambient temperature and pressure in a 127 mm inner diameter column with a 55% wt. aqueous glycerol solution, 6-mm spherical borosilicate beads and four gases - helium, air, carbon dioxide and sulphur hexafluoride - giving a 35-fold gas density range. The dispersed bubble flow regime was sustained to higher gas velocities and gas holdups for denser gases. This finding appears to be due to the reduction of the maximum stable bubble size (i.e. enhanced bubble break-up), rather than to formation of smaller bubbles at the distributor with increasing gas density. The effect of gas density was significant both with and without the particles present, with gas holdup increasing, bed voidage increasing and liquid holdup decreasing with increasing gas density. The holdup correlations of Han et al. (1990) have been modified to incorporate the effect of gas density.