Title of article :
Determination of lead(II) on a copper/mercury-plated screen-printed electrode Original Research Article
Author/Authors :
Jyh-Myng Zen، نويسنده , , Hsieh-Hsun Chung، نويسنده , , Annamalai Senthil Kumar، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2000
Pages :
9
From page :
189
To page :
197
Abstract :
A Cu/Hg-plated screen-printed electrode (CMSPE) was developed for trace Pb(II) determination by square-wave anodic stripping voltammetry. The intermetallic property of lead with copper in mercury was utilized to increase the sensitivity of Pb(II) detection. The calculated transfer coefficient value for the Pb(II)/Pb redox process on the CMSPE is ∼0.5 representing the ideality of the system for Pb(II) detection. Systematic investigations were made to optimize the Cu–Hg plating condition on SPE towards the Pb(II) signals in terms of Cu/Hg ratio, plating potential, and plating time. The optimum conditions for electrochemical and square-wave parameters were also evaluated. The calibration curve was linear in the range of 0–100 ppb Pb(II) with a detection limit of 0.81 ppb (S/N=3) for 60 s preconcentration time. The analytical utility of the CMPSE was demonstrated by applying to various water samples.
Keywords :
Square-wave voltammetry , Lead(II) , Screen-printed electrode
Journal title :
Analytica Chimica Acta
Serial Year :
2000
Journal title :
Analytica Chimica Acta
Record number :
1032008
Link To Document :
بازگشت