A study of microdialysis sampling of metal ions Original Research Article

A study of the extraction fraction (EF) of metal ions Cd, Cr, Cu, Ni and Pb sampled by microdialysis from a quiescent aqueous solution is presented. A concentric type of microdialysis probe equipped with either one of two polysulfone membranes supplied by different manufacturers or a polyether sulfone membrane, all with a 10 mm effective dialysis length was used for these investigations. EF for metal ions achieved after microdialysis sampling were evaluated for membranes exhibiting a cut-off molecular weight of 3, 5, 10 and 30 kDa. The EF for all metal ions showed a dependency on membrane cut-off as well as membrane material. For Cr EFs of 0.70 and 0.80 were achieved at 1 μl/min using a polysulfone and polyether sulfone membrane, respectively, both with a 30 kDa cut-off molecular weight. Using the polysulfone membrane, Cr showed the highest EF and Pb had the lowest at 0.1. The polyether sulfone membrane achieved an EF of 0.95 for Ni and the lowest EF value was for Cu at 0.35. In these studies it is shown that pH as well as the inclusion of an optimal concentration (0.20 M) of 8-hydroxyquinoline (8-HQ) in the perfusion liquid can enhance the EF of metal ions. Microdialysis was also used to sample for metal ions from wastewater and from whole tomatoes grown using sewage sludge manure in order to demonstrate the potential to apply it to these complicated matrices.