Nanosized SrCO3-based chemiluminescence sensor for ethanol Original Research Article

The development of a nanosized SrCO3-based sensor based on the generated chemiluminescence (CL) from catalytic oxidation of organic vapors was demonstrated. The luminescence characteristics and effect of different parameters, such as temperature and flow rate, were discussed with a prepared CL detection system. This sensor was evaluated for the measurement of gaseous ethanol as a model analyte. Under the optimized conditions, the linear range of CL intensity versus concentration of ethanol vapor is 6–3750 ppm (r=0.998, n=8), with the limit of detection of 2.1 ppm. This SrCO3 sensor shows high selectivity to ethanol. There is no response while the foreign substances, such as gasoline, ammonia and hydrogen, are passing through the sensor. The hydrocarbons can slightly interfere with the ethanol measurement. The sensor also exhibits good stability and durability during 100 h reaction with 2000 ppm ethanol. The interactions between ethanol molecules and SrCO3 involving CL emission were investigated by utilizing gas chromatography in this paper and the possible mechanism of CL from ethanol oxidation on SrCO3 was discussed.