All-solid-state electronic tongue and its application for beverage analysis Original Research Article

Disposable all-solid-state planar-type potentiometric electronic tongue has been developed with the carbon paste electrode array screen-printed on a polymeric substrate. Highly cross-sensitive solvent polymeric membranes based on different matrices [e.g. poly(vinyl chloride) (PVC), aromatic polyurethane, and polypyrrole (Ppy)] and doped with common electroactive components for potentiometric measurements (e.g. various plasticizers, and cation- and anion-selective ionophores) were deposited on the screen-printed carbon paste electrodes (SCPEs). It was observed that an incorporation of 10 wt.% of Prussian Blue (PB; Fe4(III)[Fe(II)(CN)6]3) into a commercially available carbon paste and electrochemical preanodization of SCPEs in KCl solution at 1.6 V provide the all-solid-state planar-type electrodes with significantly improved potentiometric stability. The proposed fabrication method gives possibility for simple and reproducible mass-production of low-cost disposable electronic tongue microsystems. The practical utility of all-solid-state disposable electronic tongue chips has been demonstrated with a flow injection cell for the analysis of potable waters, soft drinks, and beers. It is shown that the potentiometric measurements with the SCPE-based all-solid-state chips and the combined use of chemometric methods (e.g. principal components analysis, partial least regression (PLS), and principal component regression (PCR)) for the analysis of obtained data sets successfully discriminate various types of samples according to their tastes.