Ultraviolet photolytic vapor generation from particulate ensembles for detection of malathion residues in aerosols Original Research Article

A method to selectively generate vapor signatures from malathion entrained within matrices of surface-impacted aerosol particles has been demonstrated. The method uses ultraviolet radiation (172 or 222 nm) from a continuous wave discharge lamp to photodissociate malathion molecules collected within and on surface-impacted particles, followed by detection via ion mobility spectrometry (IMS). Since surface heating does not occur, only those molecules whose photofragments exhibit high vapor pressure are introduced into the IMS instrument and then only those exhibiting high proton affinity are subsequently detected. This process produces less signal clutter than in pyrolysis-IMS, where the background aerosol is pyrolyzed along with the sample. Quantities of malathion as small as 50 ng could be detected when the malathion was entrained on a clean surface, and as small as 100 ng when co-entrained on a surface with much larger quantities of background aerosols such as diesel soot, road dust, Bacillus globigii, albumin, and cotton lint. This sensitivity indicates that, when combined with a particle collector as an effective pre-concentrator, detection of malathion aerosol concentrations of <0.01 mg/m3 will be possible. Since malathion can be viewed as a model compound, this technique is also extendable to the detection of organophosphate war chemicals.