Major and trace metal extraction from soil by EDTA: Equilibrium and kinetic studies Original Research Article

EDTA, a powerful chelating agent, is used extensively in soil sciences to determine the bioavailability of trace metals and their possible decontamination from polluted soils. Because of its non-selective nature, the co-dissolution of major elements also occurs, in addition to the extraction of trace metal ions. In this work, the reactivity of trace and major elements (Pb, Cu, Cd, Al, Fe, Ca and Mg) with different concentrations of EDTA was studied in eight soil samples (Burgundy, France). The limit between lack and excess of EDTA with respect to total metal extracted, determined after 24 h of reaction for different types of soil varied from 0.002 to 0.05 M, respectively. For calcareous samples the amount of Pb, Cu and Cd extracted by EDTA was reduced to 50% of that extracted in non-calcareous soils. From the kinetic point of view, the extraction behavior of major elements seemed to depend heavily on excess or lack of EDTA and the soil Ca content. For a lack of EDTA, different competitive behaviors were revealed for the major elements (Al, Ca, Fe and Mg) towards the reagent, depending on the soil matrix. According to these experimental results, the mass balance between the reagent and cations in any EDTA–soil media is strongly controlled by major metal extraction. When choosing the reagent concentration needed to extract the trace metals efficiently, all the extractable metal present in the concerned sample must be taken into account.