Evaluation of calix-crown ionophores for selective separation of radio-cesium from acidic nuclear waste solution Original Research Article

Extraction of Cs-137 from nitric acid was carried out using nitrobenzene solutions of calix-crowns such as calix[4]arene-bis(crown-6) (CC-A), calix[4]arene-bis(benzo crown-6) (CC-B) and calix[4]arene-bis(napthocrown-6) (CC-C). CC-C was found to be superior extractant for Cs(I) as compared to the other two calix-crown ligands used in the present study. The effect of diluent on the extraction of Cs(I) indicated the trend: nitrobenzene > dichloroethane > chloroform > decanol ≫ carbon tetrachloride ∼ n-hexane ∼ toluene. Subsequently, the studies were carried out with nitrobenzene solutions of the calix-crown ligands (mainly CC-C) on the effects of (a) aqueous phase acidity, (b) ligand concentration, and (c) cesium concentration on Cs extraction from nitric acid media. Conditions for quantitative extraction and stripping were optimized and the extracted species conformed to {[CsL]+·[NO3]−·nH2O}. Selectivity studies were carried out using an irradiated natural U target involving tracer amount of fission products activities. Extraction of Cs(I) from a synthetic high level waste solution was also carried out. The promising results obtained in the present studies indicate possible use of the calix-crown ligand for Cs(I) recovery from the acidic high level waste.