Modeling of nucleic acid adsorption on 3D prisms in microchannels Original Research Article

Understanding nucleic acid adsorption in microchannels is critical to improve the efficiency of purifying and extracting nucleic acid (NA) from sample solutions by microfluidic technologies. Using a microchannel with 3D prismatic silica elements on the wall can dramatically increase the surface area-to-volume ratio, and hence facilitate the nucleic acid adsorption on the wall. In this study a theoretical model for modeling adsorption in a microchannel with a designed 3D surface structure was developed, and five dimensionless numbers were found to be the key parameters in the adsorption process. Extensive numerical simulations were conducted. Two flow modes, the electroosmotic flow (EOF) and pressure-driven flow (PDF), were investigated for their effect on the adsorption. It was found that the EOF is more desirable than PDF. The 3D prismatic elements can increases the NA molecule adsorption not only by providing more surface areas, but also by the induced pressure resisting the central bulk electroosmotic flow. Finally, the effects of adsorption kinetic parameters (i.e., the kinetic association/dissociation constants, the diffusion coefficient, the total site density, the loading concentration, and the channel height), on the adsorption process were discussed in detail.