Multilayer contact material based on copper and chromium material and its interruption ability

Contact material based on copper and chromium (CuCr) is widely used for vacuum interrupters (VIs) and has found worldwide acceptance in mediumvoltage applications, especially for high-current interruption. Contact material with a weight content of chromium between 25 and 60 wt.% is almost exclusively used. A new contact material was established based on a multilayer system to improve the interruption ability and mechanical properties and reduce the contact resistance. After a combined sintering and melting process in a high-vacuum furnace, a material of high density and low gas content is produced. The finished blank consists of the following layers: CuCr-sheathing, copper bulk material, and a stainless-steel support resulting from the lost mold. It turned out that the higher thermal and electrical conductivity as well as mechanical properties of the multilayer contact material improved the interruption ability of the VI. Investigations of switching behaviors were carried out in standard VIs. Additionally, the standard chromium content of 25 wt.% in CuCr and the influence of higher chromium content was investigated with respect to interruption ability. Afterwards, the microstructure on the contact surface was analyzed with scanning electron microscopy and energy dispersive X-ray.