An automatic optosensing device for the simultaneous determination of resveratrol and piceid in wines Original Research Article

For the first time, a spectrofluorimetric method is reported for the simultaneous determination of resveratrol (RVT) and piceid (PCD), two stilbenes showing diverse interesting physiological and biochemical attributes, as well as a wide range of health benefits ranging from cardioprotection to chemoprevention. The method makes use of a multicommutated flow-through optosensor in which the resolution of RVT and PCD is accomplished by means the sequential arrival of their photoproducts, on-line generated by UV-irradiation, to the detection area. This is possible due to the different kinetic behaviour of these latter on a solid support (C18 silica gel) filling a minicolumn placed before the detector. The measurement in solid-phase of the photochemically induced fluorescence of the photoproducts (λex: 257 nm/λem: 382 nm) is used as analytical signal for monitoring both compounds. The method has been applied to the analysis of RVT and PCD in wines and requires a previous solid-phase extraction (SPE) using Bakerbond C18 cartridges. This pretreatment and the use of a solid-support in both the minicolumn and the flow-cell of the detector allow the determination of RVT and PCD by external calibration. Detection limits (DLs) are 9.3 and 12.6 ng mL−1 for RVT and PCD, respectively. Commercial red and white wine samples have been analysed and the results obtained have been satisfactorily validated by high-performance liquid chromatography (HPLC).