Inkjet printed electronics for multifunctional composite structure

Copper nano-ink with a drop-on-demand (DOD) piezoelectric inkjet printing method was introduced. The printed electrodes were thermally sintered to ensure high-quality electrical and mechanical performances. To check the reliability of the printed electrodes on a polymer layer, resistance changes were measured under static loading. The electrodes with various widths and thicknesses were used to find the optimal dimensions. A multifunctional composite laminate which can harvest and store a solar energy was fabricated using printed electrodes. An amorphous silicon solar cell and a thin film solid state lithium-ion battery were adhesively joined and electrically connected to a thin flexible printed circuit board (PCB). Then, the passive components such as resistor and diode were electrically connected to the printed circuit board by silver pasting. The integrated PCB was co-cured with a carbon/epoxy composite laminate by the vacuum bag molding process in an autoclave. The structural and functional performance of the final energy harvesting/storage composite laminate was tested under mechanical loading.