Use of the task configuration system (TCS) for the design and on-line optimization of power plants operating with variable loads

The main purpose of this work is to show the ability of the TCS (task configuration system) to perform both the design and the operation optimization of power plants. The TCS is a module that permits to set the main task of each one of the equipments of the system and consequently setting how they respond to variable loads. In this work, the TCS was applied to a micro cogeneration plant of 60 kW in which both the electrical and the thermal loads were variable. Primarily, the design optimization of the nominal power of the equipments and of the TCS configuration was performed for the loads and electricity/fuel costs assumed in the design. After this operational optimizations in cases where the loads and electricity/fuel costs were doubled and then halved in relation to the standard case were performed. The results presented the TCS in a very robust way in most of the cases even the operational conditions being very different from the originally assumed. Based on the results, it is possible to defend the use of the TCS to decrease the risk of high initial investments made in cogeneration systems.