Carbon nanotube grafted silica fibres: Characterising the interface at the single fibre level

Model polymer composites containing carbon nanotube (CNT) grafted fibres provide a means to investigate the influence of nanostructures on interfacial properties. Well-aligned nanotubes, with controllable length, were grown on silica fibres by using the injection chemical vapour deposition method, leading to a significant increase of the fibre surface area. In single fibre tensile tests, this CNT growth reaction reduced the fibre strength, apparently due to catalyst etching; however, the fibre modulus increased significantly. Contact angle measurements, using the drop-on-fibre method, indicated an excellent wettability of the CNT-grafted fibres by poly(methyl methacrylate) (PMMA). PMMA model composites were fabricated and studied using the single fibre fragmentation tests. A dramatic improvement (up to 150%) of the apparent interfacial shear strength (IFSS) was obtained for the composites containing CNT-grafted fibres. The improvement of IFSS was also influenced by the length and morphology of the grafted CNTs.