Multi-walled carbon nanotubes reinforced Al2O3 nanocomposites: Mechanical properties and interfacial investigations

Well-dispersed multi-walled carbon nanotubes (CNTs) reinforced Al2O3 nanocomposites were successfully fabricated by hot-pressing. The resulting promising improvements in fracture toughness, by 94% and 65% with 2 and 5 wt.% CNTs addition respectively, compared with monolithic Al2O3, were attributed to the good dispersion of CNTs within the matrix, crack-bridging by CNTs and strong interfacial connections between the CNTs and the matrix. The interfacial phase characteristics between CNTs and Al2O3 were investigated via combined techniques. It is believed that a possible aluminium oxy-carbide as the primary interfacial phase was produced via a localized carbothermal reduction process. This interface phase presumably has good chemical compatibility and strong connections with both CNTs and the matrix and led nanocomposites to higher fracture toughness.