The effects of Clay on fire performance and thermal mechanical properties of woven glass fibre reinforced polyamide 6 nanocomposites

The effects of small amount of organically modified Clay (Clay) in polyamide 6 (PA6) on fire performance and thermal mechanical properties of Clay/PA6/woven glass fibres (GF) laminates are investigated by cone calorimeter test, dynamic mechanical thermal analysis (DMTA), and heat distort temperature (HDT) measurement. The mechanical properties, such as tensile and flexural properties of Clay/PA6 composites and Clay/PA6/GF laminates were also measured. Up to 3 wt.% Clay in a Clay/PA6/GF laminate with fibre volume fraction of 30 vol.% delayed the ignition time and peak heat release rate (PHRR) time by 55% and 118%, respectively, even though the value of the PHRR or the HDT was not significantly affected. 2 wt.% Clay increased flexural modulus and strength of the Clay/PA6/GF laminate by 10% and 16%, respectively, but more Clay did not increase the mechanical properties accordingly. Small amount of Clay does not affect glass fibre dominated properties, such as HDT, but do affect matrix dominated properties, and significantly affect the fire performance in terms of delaying ignition time and PHRR time. Optimization of laminate making process could benefit from additions of more Clay, therefore further improve fire performance and enhance mechanical properties.