Preparation, morphology and properties of acylchloride-grafted multiwall carbon nanotubes/fluorinated polyimide composites

A fluorinated polyimide (PI) was synthesized by a two-step reaction from 4,4′-(hexafluoroisopropylidene) diphthalic anhydride and 2,2′-bis(trifluoromethyl)-4,4′diaminobiphenyl. A series of PI composites with various mass fractions of multi-walled carbon nanotubes (MWNTs) were prepared by either an in situ polymerization or blending process. To increase the chemical compatibility of carbon nanotubes with the PI matrix, MWNTs were treated with an acid mixture and sulfoxide chloride by turns. Results show that the dispersion of the MWNTs is highly improved in the PI by modification. The modified MWNTs are dispersed homogeneously in the matrix, while the structures of the PI and MWNTs are stable in the preparation process. The thermal stability of the nanocomposites is slightly lower than that of the pure PI. With incorporating MWNTs, the storage modulus and glass transition temperature of the composite films enhanced comparing to that of PI matrix. The dielectric constants of the composites increase sharply, which is favorable to their practical use in anti-static materials and embedded capacitors.