Effect of block-copolymer dispersants on properties of carbon nanotube/epoxy systems

The effects of the addition of eight different block copolymers on the dispersion stability of multi-walled carbon nanotubes (MWCNTs) are reported. Suspensions of CNTs in different components of an epoxy system have been prepared using a tip sonicator and different amounts of block copolymers. The resistance to sedimentation of MWCNTs in various media was systematically investigated by using a centrifugation technique. Block copolymers that result in dispersions of MWCNTs in epoxy and hardener stable for more than 1 week have been obtained. Dispersions using a single or a combination of two different dispersing agents have been used for the fabrication of MWCNT nanocomposites. The effect of different preparation routes and use of block copolymers on the tensile properties and surface resistivity of the composites have been evaluated. The results obtained have been related with the dispersion stability of the MWCNTs in the epoxy components.