Micromechanics modeling of fatigue failure mechanisms in a hybrid polymer matrix composite

Initiation of fatigue damage for a hybrid polymer matrix composite material was studied via 3-Dimensional viscoelastic representative volume element modeling in order to gain further understanding. It was found that carbon fiber reinforced composites perform better in fatigue loading, in comparison to glass fiber reinforced composites, due to the fact that the state of stress within the matrix material was considerably lower for carbon fiber reinforced composites eliminating (or at least prolonging) fatigue damage initiation. The effect of polymer aging was also evaluated through thermal aging of neat resin specimens. Short-term viscoelastic material properties of unaged and aged neat resin specimens were measured using Dynamic Mechanical Analysis. With increasing aging time a corresponding increase in storage modulus was found. Increases in the storage modulus of the epoxy matrix subsequently resulted in a higher state of predicted stress within the matrix material from representative volume element analyses. Various parameters common to unidirectional composites were numerically investigated and found to have varying levels of impact on the prediction of the initiation of fatigue damage.