Title of article
A novel technique to achieve unity power factor and fact transientresponse in AC-to-DC converters
Author/Authors
Yang، Zaohong نويسنده , , C.S.، Paresh, نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2001
Pages
12
From page
764
To page
775
Abstract
This paper presents a novel power factor correction technique for single-phase boost type AC-to-DC converters in continuous conduction mode. Instead of using the inductor current or switching device current, in this paper, the diode current in the boost converter is used to formulate the duty ratio of the switch in a special way which makes the input current sinusoidal and in phase with the input voltage. To improve the dynamic performance and minimize the input current harmonic components, a new double-injection compensation method is employed in the voltage feedback loop. The power factor corrector has the following advantages: (1) operation with constant switching frequency; (2) elimination of input voltage sensing, error amplifier in the current loop and multiplier in the output voltage feedback loop; (3) minimal total harmonic distortion in the input current; (4) fast dynamic response of the output voltage loop; and (5) simple implementation of the control circuit. The principles of operation of the proposed control scheme are explained. Simulation and experimental results are presented to verify the feasibility of the control strategy.
Keywords
Power-aware
Journal title
IEEE TRANSACTIONS ON POWER ELECTRONICS
Serial Year
2001
Journal title
IEEE TRANSACTIONS ON POWER ELECTRONICS
Record number
104639
Link To Document