Title of article
Effect of temperature on anodized aluminum alloys
Author/Authors
Laminu، S.K. نويسنده Department of Mechanical Engineering, Ahmadu Bello University, Zaria, 234, Nigeria , , Bakari، A.A. نويسنده Department Mechanical Engineering, Ahmadu Bello University, Zaria, 234, Nigeria , , Bashir Garba، I. نويسنده Department of Maintenance and services, Ahmadu Bello University, Zaria, 234, Nigeria , , HUSSAINI، I. S. نويسنده , , Anafi، F O. نويسنده Department Maintenance and services, Ahmadu Bello University, Zaria, 234, Nigeria ,
Issue Information
دوماهنامه با شماره پیاپی 0 سال 2014
Pages
6
From page
44
To page
49
Abstract
This research is mainly concerned with the effect of temperature on anodized aluminum alloys with a view to find better physical and chemical properties of aluminum alloy through the microstructure examination. Four different temperatures were used to vary the electrolyte, the best coating (increase in weight) of 0.994g was obtained from the specimen anodized at 30 0C. As the temperature of the electrolyte increases, the coating thickness decreases. The microstructure test revealed finer grain structure on the specimen at 30 0C and the grain on the microstructure decrease as the temperature of the electrolyte increases. Breaking load of 32KN was realized at a temperature of 30 0C and decreases to 26KN at a temperature of 40 0C.
Journal title
Health, Safety and Environment (HSE)
Serial Year
2014
Journal title
Health, Safety and Environment (HSE)
Record number
1046608
Link To Document