Synthesis and optical properties of photosensitive polyimide/silica hybrid thin films

In this study, the photopatternable fluorinated polyimide/silica hybrid materials were synthesized by 4,4′-hexafluoroisopropylidenediphthalic anhydride (6FDA), oxydianiline (ODA), aminopropyltriethoxysilane (APrTEOS), and 12 nm colloidal silica with a coupling agent. The monodispersed colloidal silica was used to form a silica domain instead of alkoxysilanes in the conventional process. The coupling agents used were 3-methacryloxypropyl trimethoxysilane (MPTMS) or (4-vinylphenethyl)trimethoxysilane (VPTMS). The coupling agent and the silica domain were designed to reduce the volume shrinkage and enhance the thermal properties, respectively. The retention of 2-methyl acrylic acid 2-dimethylamino-ethyl ester (MDAE) in the prepared hybrid films was supported by X-ray photoelectron spectroscopy (XPS) and thickness variation during the curing process. The particle size of silica in the hybrid materials based on SEM analysis was in the range of 10–25 nm. The prepared hybrid materials also exhibited a reduced refractive index after increasing the silica content. The SEM diagram suggested the prepared photosensitive hybrid materials could obtain lithographical patterns with a good resolution. These results indicate that the newly prepared photosensitive polyimide/silica hybrid materials may have potential applications for optical devices.