Kinetics of thermal gradient chemical vapor infiltration of large-size carbon/carbon composites with vaporized kerosene

Large-size samples of carbon/carbon composites were prepared using thermal gradient chemical vapor infiltration with kerosene precursor at 950, 1020, 1100, 1180 and 1250 °C. The temperature gradient, kinetics and density distribution of these samples were studied and the microstructure of pyrolytic carbon was examined by polarized light microscopy. The results show that the initial infiltration rate increased from 5.81 to 21.32 g min−1 by increasing deposition temperature from 950 to 1250 °C. The densification kinetics relied on deposition temperature and competition between reaction and diffusion, and the diffusion mechanism transformed from bulk to Knudsen diffusion regime. The calculated apparent activation energy is about 68.2 kJ mol−1. The temperature range 1020–1100 °C is appropriate for fabricating composites with high final bulk density due to high degree of pore filling and the density of sample S3 infiltrated at 1100 °C is the highest among all investigated samples.