Hardness and wear resistance improvement of surface composite layer on Ti–6Al–4V substrate fabricated by powder sintering

A wear resistant surface composite layer on Ti–6Al–4V substrate was fabricated using powder sintering method. The surface composite layer consisted of Ti–6Al–4V matrix and different fractions of TiN particles as reinforcement phase. The surface layer and the substrate were directly bonded together while the powders were cold formed and then sintered at an elevated temperature. The two layers showed good metallurgical bond. In this study, 5%, 10% and 15% TiN weight fractions were adopted to fabricate the surface composite layer. Effects of TiN addition on the microstructure, hardness and wear resistance were investigated. It was found that the wear resistance of the surface composite layer was improved due to the addition of TiN compared to that of pure Ti–6Al–4V.