Dynamic properties of pultruded natural fibre reinforced composites using Split Hopkinson Pressure Bar technique

The paper presents results on dynamic mechanical properties of jute, and kenaf fibre reinforced composites at various strain rates using compression Split Hopkinson Pressure Bar technique. The stress–strain curves for both pultruded natural fibre reinforced composites at strain rates of nearly 1400 s−1 are illustrated and then compared with statically determines stress–strain curve (1.0 × 10−3 s−1). Results show that the strain rate does affect the value of dynamic compressive properties of both pultruded natural fibre composites. Higher dynamic compression modulus and 2.5% flow stress were recorded for higher strain rates as compared to lower strain rate over the range of strain rates investigated. Under dynamic loading, jute fibre reinforced composites recorded the highest value of dynamic response in terms of compression modulus, 2.5% flow stress and compressive strength than that of kenaf fibre reinforced composites. In addition, kenaf fibre reinforced composites is more severely damaged as compared to jute fibre reinforced composites for all tested strain rate.