Sorption heat pipe—a new thermal control device for space and ground application

Sorption heat pipe (SHP) combines the enhanced heat and mass transfer in conventional heat pipes with sorption phenomena in the sorbent bed. SHP consists of a sorbent system (adsorber/desorber and evaporator) at one end and a condenser + evaporator at the other end. It can be used as a cooler/heater and be cooled and heated as a heat pipe. SHP is suggested for space and ground application, because it is insensitive to some “g” acceleration. This device can be composed of a loop heat pipe (LHP), or capillary pumped loop (CPL) and a solid sorption cooler. The most essential feature is that LHP and SHP have the same evaporator, but are working alternatively out of phase. SHP can be applied as a cryogenic cooler, or as a fluid storage canister. When it is used for cryogenic thermal control of a spacecraft on the orbit (cold plate for infrared observation of the earth, or space), or efficient electronic components cooling device (lased diode), it is considered as a cooler. When it is applied as a cryogenic storage system, it insures the low pressure of cryogenic fluid inside the sorbent material at room temperature.