The thermal stability of high-energy ball-milled nanostructured Cu

The thermal stability of nanostructured (NS) Cu prepared by high-energy ball milling was investigated. The as-prepared samples were isothermal annealed for 1 h in the temperature range of 200–1000 °C. Effects of annealing on NS Cu samples were studied by means of Vickers hardness test, differential scanning calorimetry (DSC) and stress relaxation test. The exceptional high microhardness of as-prepared Cu sample of 1.7 GPa was not detected to decrease after annealing at 500 °C for 1 h with corresponding small value of activation volumes V* of 22.6b3 and high value of strain rate sensitivity m of 0.0176. A prominent decrease of microhardness was detected after higher temperature annealing with a rapidly increase of activation volume and decrease of strain rate sensitivity. The present investigation demonstrates that the thermal stability of NS Cu prepared by high-energy ball milling is determined by not only the grain size but also the microstructure of grain boundaries, and during annealing process, the strain release process occurred prior to the grain growth process, therefore, the NS Cu has a relatively high thermal stability.