• Title of article

    Influence of W content on tribological performance of W-doped diamond-like carbon coatings under dry friction and polyalpha olefin lubrication conditions

  • Author/Authors

    Zhiqiang Fu، نويسنده , , Cheng-biao Wang، نويسنده , , Wei Zhang، نويسنده , , Wei Wang، نويسنده , , Wen Yue، نويسنده , , Xiang Yu، نويسنده , , Zhijian Peng، نويسنده , , Song-sheng Lin، نويسنده , , Ming-jiang Dai، نويسنده ,

  • Issue Information
    ماهنامه با شماره پیاپی سال 2013
  • Pages
    5
  • From page
    775
  • To page
    779
  • Abstract
    The influence on tungsten content on the structure, mechanical properties and tribological performance of W-doped diamond-like carbon (DLC) coatings was studied by X-ray photoelectron spectroscopy, nano-indentation, scratch test, and ball-on-disk friction test. It was found that with increasing W content, the content of WC and free W in the coatings is increased while the content of sp3-C in the coatings is decreased. The effect of W content on the hardness and elastic modulus of the coatings is indistinctive, but there exists the highest critical load of scratch test of above 100 N when W content is 3.08 at.%. With the increase of W content, the friction coefficients of W-doped DLC coatings under dry friction conditions are increased while the friction coefficients of W-doped DLC coatings under polyalpha olefin (PAO) lubrication are decreased. With the increase of W content, the wear rates of the DLC-coated samples under dry friction conditions show a minimum value; under pure PAO lubrication, the influence of W content on the wear rates of the DLC-coated samples is indistinctive when the W content is below 10.73 at.% while the wear rates are increased with increasing W content from 10.73 at.% to 24.09 at.%; when lubricated by PAO + thiophosphoric acid amine (T307) salt, the samples coated with the undoped DLC or the W-doped DLC with high W content exhibit low wear rates.
  • Keywords
    Coatings , Diamond-like carbon , Oil lubrication , Tribological performance
  • Journal title
    Materials and Design
  • Serial Year
    2013
  • Journal title
    Materials and Design
  • Record number

    1073454