Efficient computational modelling of carbon fibre reinforced laminated composite panels subjected to low velocity drop-weight impact

This paper reports on the actual and virtual low velocity impact response of carbon fibre composite laminates. It utilises the contribution of through-thickness stresses, in the prediction of the onset of internal damage created by this type impact scenario. The paper focuses on the damage imparted by the flat nose impactor since this induces a different type of damage and structural response compared to that of the standard test method of using a round nose impactor. Vulnerability of the fibrous composites to vertical drop-weight impact can result in premature failure which is a major concern in their widespread usage. The topic has been of intense research to design more damage tolerant and resistant materials. However, due to materials’ anisotropic and three-dimensional nature and complicated damage mechanisms no standard model could have been achieved. Designers predict consequences of a local impact within the global structural context without full-scale testing. Majority of the existing simulation models neglect through-thickness stresses that are regarded as the major cause of catastrophic failures. Efficient and reliable investigations are required to reduce testing and include through-thickness stresses. Drop-weight impact simulation models were developed herein using ABAQUS™ software. Simulations were carried out to compute in-plane stresses subjected to flat and round nose impacts on laminates of differing thicknesses. These stresses once computed were numerically integrated employing the equilibrium equations to efficiently predict through-thickness stresses. The predicted stresses were then utilised in failure criteria to quantify the coupled and embedded damage. This provides a quick insight into the status and contribution of through-thickness stresses in failure predictions. The computed values were compared to the experimental results and found to be in good agreement.