Jet impingement interaction with cross flow in horizontal porous layer under thermal non-equilibrium conditions

In the present article the jet impingement cooling of heated portion of a horizontal surface immersed in a thermally non-equilibrium porous layer is considered for investigation numerically with the presence of a cross flow. The mathematical model is derived for steady, two-dimensional laminar flow based on Darcy model and two-energy equation for fluid and solid phases. A parametric study is carried out by varying the following parameters: cross flow to jet flow velocity ratio parameter (0 ⩽ M ⩽ 1); porosity scaled thermal conductivity ratio parameter (0.1 ⩽ Kr ⩽ 1000); heat transfer coefficient parameter (0.1 ⩽ H ⩽ 1000); Péclet number (1 ⩽ Pe ⩽ 1000) and Rayleigh number (10 ⩽ Ra ⩽ 100). The total average Nusselt number is defined based on the overall thermal conductivity, which is assumed to be the arithmetic mean of the porosity scaled thermal conductivity of the fluid and solid phases. The total average Nusselt number as well as the average Nusselt number for both fluid and solid phases is presented for different governing parameters. It is found that the presence of a weak cross flow in a jet impinging jet may degrade the heat transfer. The results show that the average Nusselt number calculated from the thermal equilibrium model are the maximum possible values and these values can be reproduced by large values of H × Kr.