Optimal control of flow in solar collectors for maximum exergy extraction

The best operation strategies for open loop flat-plate solar collector systems are considered. A direct optimal control method (the TOMP algorithm) is implemented. A detailed collector model and realistic meteorological data from both cold and warm seasons are used in applications. The maximum exergetic efficiency is low (usually less than 3%), in good agreement with experimental measurements reported in literature. The optimum mass-flow rate increases near sunrise and sunset and by increasing the fluid inlet temperature. The optimum mass-flow rate is well correlated with global solar irradiance during the warm season. Also, operation at a properly defined constant mass-flow rate may be close to the optimal operation.