Optimization of short micro pin fins in minichannels

Finned minichannels are modeled in order to optimize microstructure geometry and maximize heat transfer dissipation through convection from a heated surface. Six pin fin shapes – circle, square, triangle, ellipse, diamond and hexagon – are used in a staggered array and attached to the bottom heated surface of a rectangular minichannel and analyzed. Also, using square pin fins, different channel clearance over fins are investigated to optimize the fin height of the fins with respect to that of the channel. Fin width and spacing are investigated using a ratio of fin width area to the channel width. Fin material is then varied to investigate the heat dissipation effects. Triangular fins with larger fin height, smaller fin width, and spacing double the fin width maximizes the number of fins in each row and yields better performance. Correlations describing the Nusselt number and the Darcy friction factor are obtained and compared to previous ones from recent studies. These correlations only apply to short fins in the laminar regime. Completely understanding the effects of micro pin fins in a minichannel is essential to maximizing the performance in small scale cooling apparatuses to keep up with future electronic advancements.