Erratum to “The effect of particle size on the erosion of a ductile material at the low particle size limit” [Wear 233–235 (1999) 727–736]

The intrinsic particle size dependence of erosion rate was investigated in the absence of aerodynamic effects. An apparatus was designed to impact small particles on metallic substrates at normal incidence in vacuum. Two types of target materials, Cu–30% Zn and pure Ti, were impacted with SiO2 particles with average diameters of 2, 5 and 25 μm. The velocity of impact was 12 m/s. Damage processes induced by single particles were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). This latter technique allowed for the measurement of impact profiles, both of the cut surfaces and the associated displaced material pile-ups. The impacts produced were, in many cases, asymmetrical, and the asymmetries appeared to be related to the orientation of the impacted surface. The appearance of the damage was essentially the same for all three sizes of the erodent, and for two different substrate materials having different crystal structures.