Amorphous diamond coating of tungsten carbide and titanium carbonitride for erosive slurry pump component service

Tungsten carbide spray coatings have become well established for resisting abrasion and erosion in pumps used in conventional oil production and in oil sands operations. To achieve additional benefits from the extreme wear resistance of tungsten carbide its use is being extended to solid forms for some critical components. Slightly harder titanium carbonitride-based cermets have much lower density and coefficient of thermal expansion and for these reasons are being considered as an alternative to tungsten carbide. PVD amorphous diamond coating also has potential to further increase the service life of selected pump parts fabricated from solid cermets. Micro-abrasion testing and single scratch and nano-indentation evaluation have been carried out on non-coated and PVD amorphous diamond coated WC-4.8% TaC–4.5% TiC/6% Co–1% Cr and TiCN-17% WC/8% Mo materials. Data obtained illustrate that the tungsten–carbide based product has superior wear properties to the titanium carbonitride material and that PVD amorphous diamond coating of both cermets enhanced wear resistance significantly and displayed potential for successful service application.