Removal of metals and anions from drinking water by ion exchange Original Research Article

Five organic and two inorganic ion exchangers were evaluated for the removal of metals and anions from water of two drilled wells. Sodium titanate (CoTreat) and a chelating aminophosphonate resin were the most efficient exchangers in removing transition metals from the total of 1800 bed volumes processed. CoTreat was the best for almost all of the transition metals. The breakthrough level of manganese was below 1% with CoTreat even when its concentration in the feed water was high (1 mg/l). The weak acid cation resin took up transition metals relatively efficiently. Somewhat unexpectedly, the cation exchangers also removed arsenic from water. Arsenic may have been sorbed on iron species, which again was adsorbed and filtered by the exchanger beds. Most of the cation exchangers took up calcium and magnesium at low processing capacities (<400 BV), and the strong base anion resin took up nitrate, bromide and sulphate very efficiently below 700 bed volumes. Neither chloride nor fluoride was taken up by the exchangers tested.