Ranking of antiscalant performance for gypsum scale suppression in the presence of residual aluminum Original Research Article

An approach to ranking antiscalant effectiveness for gypsum scale suppression using combined bulk crystallization and membrane scaling diagnostic tests was explored with a focus on the adverse impact of residual aluminum in dissolved (Al3+) and as colloidal species on gypsum scale suppression. Five commercial antiscalants were ranked based on the crystallization induction time as determined in a well-mixed crystallization vessel with a back-light scattering turbidity meter to monitor gypsum formation. The presence of aluminum, even at trace levels (up to 100 μg/L), significantly reduced the crystallization induction time, thereby reducing antiscalant effectiveness. For a given antiscalant dose, the crystallization induction time decreased with increasing total aluminum concentration according to a log-linear relationship. Although the above qualitative behavior was similar for the tested commercial anti-scalants, the adverse impact of aluminum on antiscalants effectiveness differed markedly among the different antiscalants. Diagnostic scaling tests in a plate-and-frame RO module demonstrated antiscalant performance ranking of the same order as that obtained based on bulk crystallization induction time measurements.