Role of activated carbon structural properties and surface chemistry in mercury adsorption Original Research Article

In this work the performance of activated carbons prepared from raw and demineralised lignite for gas-phase Hg° removal was evaluated. A two-stage activation procedure was used for the production of the activated samples. In order to study the effect of mineral matter on pore structure development and surface functionality of the activated carbons, a demineralisation procedure involving a three-stage acid treatment of coals, was used, prior to activation. Hg° adsorption tests were realized in laboratory-scale unit consisted of a fixed-bed reactor charged with the tested activated samples. The examined adsorbent properties that may affect removal capacity were the pore structure, the surface chemistry and the presence of sulphur on the surface of activated carbons. The obtained results revealed that activated carbons produced from demineralised lignite posses a high-developed micropore structure with increased total pore volume and BET surface area. These samples exhibit enhanced Hg° adsorptive capacity. In all cases, mercury removal efficiency increased by sulphur addition. Finally, the starting material properties and activation conditions affect the concentration and the type of the oxygen groups on activated carbon surface, that have been determined with TPD-MS experiments.