Adsorption of methylene blue by acid and heat treated diatomaceous silica Original Research Article

Diatomite, an abundant inorganic material in Jordan, was treated with sulfuric acid and heat treated in order to improve its performance as an adsorbent. The acid treated diatomite (ATD) was used to adsorb methylene blue from aqueous solutions. The equilibrium data were fitted to different adsorption isotherms and the best fit was obtained using Langmuir isotherm with R2 value of about unity. The maximum loading capacity, Qmax was found 126.6 mg/g at 30EC and increases slightly as the temperature increases. The kinetics data were best described by the pseudosecond order model with a value of the model constant k2 of 1.056 (g/mg h) at 30EC and an initial dye concentration of 50 mg/l. The thermodynamic parameters such as the standard enthalpy (ΔH0), standard entropy (ΔS0) and standard free energy (ΔG0) were evaluated. The obtained results indicated the adsorption of basic dyes onto ATD is endothermic and spontaneous process and confirmed the applicability of this modified inorganic material as an efficient adsorbent for basic dyes.