Preparation and characterization of carbon molecular sieve membranes for gas separation—the effect of incorporated multi-wall carbon nanotubes Original Research Article

A new class of multi-wall carbon nanotubes (MWCNTs)/carbon nanocomposite thin films was successfully prepared by incorporating (MWCNTs) into polyimide (PI) precursor solution. The carbon films were obtained in only one coating step by spin-coating technique on a macroporous alumina substrate and were pyrolyzed at 773 K. The structure and single gas permeation properties of PI-based carbon membranes incorporated with or without MWCNTs were investigated. From the FE-SEM images, the pure carbon membranes have a thin dense permselective layer with few closed pores while the permselective layer of the MWCNTs/carbon nanocomposite thin films are porous due to the structure of nanotubes. The MWCNTs/carbon nanocomposite thin films exhibited that the ideal carbon dioxide flux was 866.6 Barrer (1 Barrer = 1×10−10 cm3 (STP) cm cm−2 s−1 cm Hg−1) and the separation factor of CO2/N2 was 4.1 at room temperature and 1 atm, which was 2–4 times of magnitude higher than that of pure carbon membrane prepared by the same procedures and conditions.