Removal of boron from Balcova geothermal water by ion exchange–microfiltration hybrid process Original Research Article

This study is focused on the application of the ion exchange–submerged microfiltration hybrid process for boron removal from geothermal water containing high level of boron (8–9 mg B/L). The goal of this study is to determine the optimum parameters such as feed flow rate, resin concentration and resin particle size that govern the efficiency of separation process. During the sorption process, 100–200 mL/h of geothermal water was passed through the membrane module at predetermined permeate flow rates. During the short period of operation (2 h) using boron selective ion exchange resin Diaion CRB02, 0.5 mL/min of flow rate for fresh and saturated resin, 4.2 g/L of resin concentration and 45–125 μm of resin particle size range were found as optimum conditions to decrease the boron concentration in water to the permissible level. In case of the longer period of operation (24 h) conducted by Dowex (XUS 43594.00) resin, a permeate flow rate of 1 mL/min, a resin concentration of 2 g/L and an average resin particle size of 0–20 μm were the optimum conditions for boron removal from geothermal water.