Construction of barium (II) PVC membrane electrochemical sensor based on 3-deoxy-d-erythro-hexos-2-ulose bis (thiosemicarbazone) as a novel ionophore Original Research Article

In this study, a new ion-selective electrode for Ba2+ is described, illustrating 3-deoxy-d-erythro-hexos-2-ulose bis (thiosemicarbazone) (DHUT) in a poly(vinylchloride) (PVC) membrane with benzyl acetate (BA) as a plasticizer and sodium tetraphenyl borate (NaTPB) as an anionic additive. This sensor presented very good selectivity and sensitivity towards the Ba2+ ions over a wide variety of cations, including alkali, alkaline earth, transition and heavy metal ions. The electrode revealed a great improvement in the selectivity coefficients for the Ba2+ ions in comparison with the formerly reported Ba2+ sensors. The proposed electrode exhibited a significantly enhanced response towards the Ba2+ ions across the concentration range of 1.0 × 10− 6–1.0 × 10− 2 M for the pH variation from 2.6 to 11 with a lower detection limit of 5.6 × 10− 7 M. Moreover, the sensors displayed the Nernstian slope of 29.6 ± 0.5 mV per decade, having a fast response time within 15 s over the entire concentration range. It could also be used for at least 2 months with no potential divergence. As a result, the developed sensor was successfully applied to the direct barium ion determination in solutions, rock samples and as an indicator electrode in the Ba2+ ion potentiometric titration with EDTA.