Removal of Cu (II) from water pollutant with Tunisian activated lignin prepared by phosphoric acid activation Original Research Article

Activated lignin with a relative high BET surface area and a well-developed porosity has been prepared from Tunisian deposit lignin, by H3PO4 activation at various process conditions. Physical and chemical properties of activated carbons produced, implying BET surface area, Boehm titration, Fourier Transform Infrared Spectroscopy (FTIR) and thermogravimetric analysis (TGA), were investigated. It was found that the maximum surface area reached at the carbonization temperature of 500 °C in H3PO4 activation, and that the activated lignin prepared from lignin acidic activation, showed a surface area of 463 m2/g. The potential application of these carbons for the removal of heavy metal contaminant, has been investigated by measuring their adsorption capacities for Cu (II) as representative of main local toxic contaminant found in industrial wastewaters. The results obtained compare well and even favourably with those reported in literature for other unconventional materials.