Ferric chloride-graphite intercalation compounds prepared from graphite fluoride Original Research Article

The reaction between graphite fluoride and ferric chloride was observed in the temperature range of 300 to 400 °C. The graphite fluorides used for this reaction have an sp3 electronic structure and are electrical insulators. They can be made by fluorinating either carbon fibers or powder having various degrees of graphitization. Reaction is fast and spontaneous and can occur in the presence of air. The ferric chloride does not have to be predried. The products have an sp2 electronic structure and are electrical conductors. They contain first-stage FeCl3 intercalated graphite. Some of the products contain FeCl2·2H2O, others contain FeF2, in concentrations that depend on the intercalation condition. The graphite intercalated compounds (GIC) deintercalated slowly in air at room temperature, but deintercalated quickly and completely at 370 °C. Deintercalation is accompanied by the disappearance of iron halides and the formation of rust (hematite) distributed unevenly on the fiber surface. When heated to 400 °C in pure N2 (99.99 vol%), this new GIC deintercalates without losing its molecular structure. However, when the compoundsare exposed to 800 °C N2 in a quartz tube, they lost most of their halogen atoms and formed iron oxides (other than hematite), distributed evenly in or on the fiber.