Adsorption of dyes on activated carbons: influence of surface chemical groups Original Research Article

The surface chemistry of a commercial activated carbon has been selectively modified, without changing significantly its textural properties, by means of chemical treatments, using HNO3, H2O2, NH3, and thermal treatments under a flow of H2 or N2. The resultant samples were characterized in terms of their surface chemistry and textural properties, and subsequently tested in the removal of different classes of dyes. It was shown that the surface chemistry of the activated carbon plays a key role in dye adsorption performance. The basic sample obtained by thermal treatment under H2 flow at 700 °C is the best material for the adsorption of most of the dyes tested. For anionic dyes (reactive, direct and acid) a close relationship between the surface basicity of the adsorbents and dye adsorption was shown, the interaction between the oxygen-free Lewis basic sites and the free electrons of the dye molecule being the main adsorption mechanism. For cationic dyes (basic) the acid oxygen-containing surface groups show a positive effect but thermally treated samples still present good performances, showing the existence of two parallel adsorption mechanisms involving electrostatic and dispersive interactions. The conclusions obtained for each dye individually were confirmed in the colour removal from a real textile process effluent.