Title of article
Simple approach for the fabrication of carbon nanotube field emitter using conducting paste Original Research Article
Author/Authors
Jae Hong Park، نويسنده , , Jong Hyung Choi، نويسنده , , Jin-San Moon، نويسنده , , D.G. Kushinov، نويسنده , , Ji-Beom Yoo، نويسنده , , Chong Yun Park، نويسنده , , Joong-Woo Nam، نويسنده , , Chun Kyu Lee، نويسنده , , Jong-Hwan Park، نويسنده , , D.H Choe، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2005
Pages
6
From page
698
To page
703
Abstract
A conducting layer using carbon nanotube (CNT) paste was prepared by mixing multi-walled CNT (MWNT), organic vehicles and spin on glass (SOG). The effect of SOG on the properties of the CNT paste was evaluated and compared to that of CNT paste with a glass frit. CNT powders were coated on the conducting CNT film either by sprinkling CNT powders onto the overall conducting layer area or by dropping a solution containing well dispersed CNTs. CNTs were strongly fixed by the formation of silica after heat treatment. The samples showed good field emission characteristics with turn-on electric fields of approximately 1.6 ∼ 2.2 V/μm. SOG was found to be an efficient inorganic binder for CNTs in the CNT paste.
Keywords
C. scanning electron microscopy , D. Field emission , A. Carbon nanotube , B. mixing
Journal title
Carbon
Serial Year
2005
Journal title
Carbon
Record number
1121030
Link To Document